본문바로가기

Product

제니스텍을 방문해주셔서 감사합니다.

LANTIME M3000S

Product Description

LANTIME M3000S는 19인치 racks과 21인치 racks(with an adapter)에 설치할 수 있습니다. S chassis의 장착 깊이가 줄어들어 300mm ETSI racks에 시스템을 장착할 수 있습니다. 표준 M3000 chassis는 전원 공급 장치 슬롯 4개, 클럭 모듈 슬롯 2개, 매끄러운 전환 카드 슬롯 1개, CPU 슬롯 1개 및 추가 입력 및 출력 모듈용 슬롯 10개가 제공됩니다. 두 번째 클럭 module과 필요한 RSC 스위치 module을 추가하면 M3000S가 완전 중복 솔루션으로 바뀝니다. 설치할 수 있는 최대 4개의 전원 공급 장치는 하나 이상의 전원 및 전원 공급 장치 장애에 대한 높은 수준의 보호를 제공합니다. 필요에 따라 넓은 범위의 AC 및 DC 전원 공급기 모델을 혼합하고 일치시킬 수 있습니다.

· Optimized space usage

· Synchronization of NTP and SNTP compatible clients

· Web-based status and configuration interface and console-based graphical configuration utillity

· IMS - Intelligent Modular System platform

· Up to 10 PTP (IEEE 1588-2008) modules

· Redundant power and receiver option (eg GPS / GLONASS combination)

· Hog plug 

· Arbitrary combinations of modules

· Meinberg's LANTIME time server is available with a variety of additional output options: IRIG Time Code, frequency synthesizer and programmable pulse outputs illustrate some of 

  the many expansion options for your NTP server

· Up to 24 additional LAN ports

Just like the  M3000 standard model, the LANTIME M3000S supports the following slot type:


· IMS-CLK : Up to two reference clock modules (redundant mode)

· IMS-SCU : Accepts an RSC module for redundant operation (two CLK modules installed) or an SPT module for a single CLK configuration

· IMS-PSU : Up to four high effciency redundant power supplies (AC and DC versions available)

· IMS-CPU : central processor module providing NTP / SNTP time synchronization as well as remote and local management and configuration interfaces

· IMS-IO : A variety of output signals for all types of synchronization tasks: electrical and optical pulses, frequencies, time codes and serial time messages as well as additional network 

                interfaces for network synchronization (IEEE-1588, NTP, Synchronous Ethernet) and additional remote management capabilities


High-End NTP network Time Server for your Network

시스템은 초당 최대 25,000개의 NTP 요청(설치된 CPU module에 따라 다름)을 통해 수백, 수천 개의 NTP 클라이언트(client)에 시간을 제공할 수 있습니다. LANTIME 관리 CPU module은 NTP/SNTP(v2, v3, v4), HTTP(S), SSH, Telnet, SNMP(v1, v2, v3), FTP, SFTP, DHCP/DHCPv6 프로토콜을 지원합니다. 각 시스템에 대해 최대 99개의 논리적 네트워크 인터페이스를 사용할 수 있습니다(99개의 IPv4 및 99개의 IPv6 압축, 각 논리적 인터페이스를 하나의 VLAN ID에 할당할 수 있음). IPv6/Dual Stack 지원, IEEE 802.1Q VLAN 지원, LACP/high availability 바인딩(vonding) 및 DSCP 및 IEEE 802와 같은 엔터프라이즈급(Enterorise-grade) 기능을 제공합니다.1p QoS/Cos 트래픽 우선 순위를 지정하면 금융 데이터 센터, 변전소, NGN 통신 네트워크, 디지털 방송 인프라, 항공 교통 관제 시스템 및 기타 많은 환경 등 거의 모든 중요한 환경에서 이 제품을 설치하고 운영할 수 있습니다.


Synchronization for 2G / 3G / 4G base stations and LTE Advanced networks.

PTP 구현은 ITU-T profiles(주파수의 경우 ITU-T G.8265.1)과 주파수 및 위상의 경우 ITU-T G.8275.1을 모두 지원합니다. 이를 통해 LTE Advanced 네트워크뿐만 아니라 2G/3G/4G 기지국(base station)을 포함하여 동기화가 필요한 모든 네트워크 요소에 대해 packet 네트워크를 통한 정확한 주파수 및 위상 동기화가 가능합니다.


Scalable Synchronization Solution

모든 module은 hot-pluggable 가 가능하며 중앙 웹 인터페이스(web interface) 또는 CLI를 통해 구성할 수 있습니다. 입력 및 출력 중간자의 거의 무한한 조합은 거의 모든 동기화 작업을 처리하고 시스템이 다양한 역할에 적합하도록 합니다. 현장에서 업그레이드할 수 있으므로 확장성이 뛰어나고 유연한 IMS 개념은 고객의 요구에 따라 확장될 것입니다. 새로운 기술은 새로운 커넥터, 신호 유형 또는 프로토콜을 지원하는 해당 모듈이 제공되는 즉시 기존 장치에 쉽게 통합될 수 있습니다. 이렇게 하면 동기화 요구사항이 변경될 때 기존 장치를 교체하거나 완전히 새로운 시스템을 추가할 필요가 없으므로 투자를 보호할 수 있습니다.


Flexible Synchronization References:

IMS-MRI:Standard reference input cards supporting a number of different input signals like 1PPS, 10MHz, IRIG DCLS, IRIG AM

IMS-ESI: Extended reference inputs for synchronization sources like E1/T1 framed and unframed signals

Both of these slot typed can alternatively accept I/O cards and therefore can be used to add output modules or network interfaces, resulting in a maximum of 10 output modules per chassis in combination with the 6 I/O slots.


IMS 플랫폼의 hot-piug 기능으로 인해 downtime 없이 시스템과 module에 부정적인 영향을 미치지 않으면서 module을 추가하거나 교체할 수 있습니다. 전원 공급 장치 장애 및 다수의 추가 동기화 관련 경보는 mail/SMTP messages, SNMP traps, SYSLOG messages 또는 경보 릴레이 카드와 같은 여러 프로토콜을 사용하여 통신할 수 있습니다.


IMS Modules


xthumb_600.PNG


BPE and CPE Modules

pulses(1PPS, 1PPM, 프로그래밍 가능한 pulses) 및 주파수(10MHz, 2048kHz, 주파수 합성 1kHz-10MHz)와 같은 대부분의 표준 출력 신호는 BPE 및 CPE라는 두 개의 다목적 I/O 카드에 의해 유도됩니다. 이 두 module은 모두 광범위한 인터페이스 및 signal/protocol 요구사항을 충족하도록 설계되었습니다. BPE 모듈은 내부 backplane을 통해 기준 수신기에서 생성된 신호를 보드의 사용 가능한 물리적 연결로 분배합니다. BPE-8000 시리즈의 module에는 LANTIME 웹 인터페이스를 통해 출력 신호를 구성할 수 있는 전자 스위치도 있습니다. CPE module은 back-end와 front-end로 구성된 2계층 아키텍처(architecture )를 특징으로 합니다. back-end는 내부 backplane을 통해 기준 clock에 의해 제공되는 IMS 동기화 신호를 내부적으로 routing하는 역할을 합니다. front-endon-board 마이크로프로세서를 사용하여 다양한 신호를 자동으로 결합하고 물리적 커넥터(connector)를 통해 이러한 신호를 선택할 수 있습니다. 많은 전문 IMS module이 다른 애플리케이션 요구사항을 충족합니다. 


예를 들어, 완전한 SSM/BOC 지원의 E1/T1 framed/unframed stnchronization signak 또는 low phase noise 10MHz sine wave 주파수 출력이 포함됩니다. NTP, PTP/iEEE 1588, SyncE 및 원격 관리 액세스(remote management access)를 위한 추가 네트워크 인터페이스도 사용할 수 있습니다.



LANTIME M3000S_1.jpg

M3000S - Chassis without LE-Display


LANTIME M3000S_2.jpg

M3000S with ETSI Rackmount Kit

Product Relation