본문바로가기

Product

제니스텍을 방문해주셔서 감사합니다.

M/GE-PSW-PSE-01

Product Description

이 Gigabit Ethernet Stand-alone Mini Media Converter는 10/100/1000Base-T ports와 100/1000Base-SX/LX ports 간에 비용 효율적인 미디어 변환을 제공합니다.

구성이 고정되어 있어 플러그 앤 플레이 방식으로 구현이 가능하며, 크기가 작기 때문에 공간이 제한된 위치에 이상적입니다. Data link layer, Layer 2에서 작동하는 이 변환기는 copper를 fiber로 변환할 뿐만 아니라 기존 10/100 opper devices를 1000Base-SX/LX 파이버에 연결할 수 있는 속도 변환 기능도 제공합니다.

이 변환기는 copper-fiber 변환을 제공할 뿐만 아니라 fiber optic 링크를 통해 수신된 데이터를 56VDC 입력 전력과 결합하여 IEEE 802.3af 및 IEEE 802.3at Po+E standards를 준수하면서 twisted Pair 케이블을 통해 전력 및 데이터를 Powered Device (PD)에 제공합니다.

이를 통해 사용자는 PoE(Power-over-Ethernet) 기술의 혜택과 함께 fiber optic 케이블의 이점을 활용할 수 있습니다.

PoE를 지원하면 이 변환기가 VoIP Phone, 보안 카메라 및 무선 액세스 포인트와 같은 장치에 데이터 및 전력을 전송할 수 있으며, 특히 fiber optic 케이블로만 연결할 수 있는 네트워크의 원격 영역에 위치해야 할 경우 더욱 그렇습니다.

  • Wall mount, DIN Rail, or table top installation
  • External AC/DC power supply included with country specific power cord
  • 2-port 10/100/1000 copper to fiber media conversion with IEEE 802.3at PoE+ on the copper port
  • Supports full 30 Watts of power to the twisted pair port
  • SFP slots can support any 100Base-FX or 1000Base-X fiber SFP module
  • Supports Auto-Negotiation
  • Supports Auto-MDI/MDIX
  • Active Link Pass Through (ALPT)
    • Automatically detect the loss of Receive (Rx) signals on either fiber or copper port and propagate the failure to the end devices
  • Auto Power Reset
    • Re-set the power to the end PD device during a Link Pass Through (LPT) event, ensuring it is ready to go when the fault is corrected
  • Jumbo frame support
  • 8K MAC address table
  • LEDs indicators for power status, Link/Activity per port, & PoE status/ classification
  • Plug-and-Play fixed configuration, no dip-switches
  • Over-current protection
  • Under-current protection
  • Fault protection input